Performing Debug Recording
This feature enables Admin users to perform media/DSP debugging.
DSP recording can be activated on the fly without requiring the network administrator to reset the device.
| ➢ | To set up recording: |
| 1. | Access the 'Debugging' page (see System Monitoring and Debugging). |
| 2. | Tap Debug Recording, then tap Voice record to enable the feature. |
| 3. | Tap Remote IP address to input the IP address of the device whose traffic you want to record. |
| 4. | Tap Remote port and input it (Default: 50000). |
| 5. | Start Wireshark on your PC to capture audio traffic. |